Hydraulic Press

HYDRAULIC PRESS / SP-MLH


Description

¨ÍHigh speed ¨ÎCompact size & light weight ¨ÏPump built-in / Low noise ¨ÐFor 3 tons and 5 tons

Example use of automatic assembly machine

Dimension

Description on the perfomance curve

Example)
  1. Type : SP-3MLH
  2. Working pressure : 80kgf / §²
  3. Condition time : 0.5sec

Looking at the performance curve under the above condition, it can be processed for 12 times. Processing for more than 12 times will require cooler. In addition, if the pressure time is 0.25 sec. then it can be processed up to 17 times without cooler.

Note:
  1. The performance curve shows the number of processing for a minute if the room temperature is at 30¡É and the hydraulic temperature is within 65¡É.
  2. It can't be used for more than 60 times/min even if the oil cooler is mounted.
  3. If the required pressure and the cross point are in the left side rather than the pressure time curve required, no cooler is required but if it is in the right side then the cooler is required.

PRESS connectiong position

Required time for a stroke

STROKE
(mm)
30 40 50 60
3LH 0.60 0.78 0.98 1.18
5LH 0.85 1.20 1.33 1.61

Specification»ç¾ç

Model type SP - 3MLH SP - 5MLH
Performance (ton) 1.5 ~ 3 2 ~ 5
RAM STROKE (mm) 150
RAM descending speed (mm / sec) 128.3 128.3
Pressure applying type 53 38
RAM ascending speed (mm / sec) 91.7 56.7
Maximum hydraulic pressure (kgf / §²) 80 98
Working pressure SHELL, TELLUS, Capacity 6§¤
MOTOR 3 Phase AC200V 4P 1.5KW
Weight 250kg